畜牧人

標題: Reducing Energy Costs in Swine Barns [打印本頁]

作者: bonderic    時間: 2008-8-18 16:58
標題: Reducing Energy Costs in Swine Barns
To assess current energy consumption patterns in swine operations, a survey followed by energy audits were conducted in different types of swine barns in Saskatchewan. Benchmark information showed high variability in the use of energy even among the same type of barns, indicating wide opportunities to improve energy use practices. The next step would be to use computer simulation to evaluate different energy saving measures and to quantify the reduction in energy costs that can be achieved from implementation of these strategies.


INTRODUCTION

Swine production involves energy intensive tasks. With increasing energy prices and concern with greenhouse gas emissions from energy generation, reducing energy use is imperative to reduce overall cost of production in swine operations while contributing to mitigation of greenhouse gas emissions in the process. The goals of the current phases of this study are to gather benchmark information on current energy usage in swine barns, to conduct energy audits to document energy use practices in various types of swine barns, and to evaluate different applicable energy-saving measures using computer simulation.


RESULTS AND DISCUSSION

Twenty-eight (28) different swine facilities participated in the energy survey conducted in February 2007. From each barn, information on barn energy use and pig production numbers over the past 3 years were obtained. As shown in Table 1, the average utility cost (electricity and gas) per animal marketed ranged from $6.80 for farrow-to-finish barns to $0.60 for nursery barns. Interestingly, some barns were using twice as much energy as the average for all barns; energy usage between the barns which used the least amount of energy per animal and the most intensive energy users differed by as much as four times.


Table 1. Energy costs per animal for different types of barns.

Type of Barn
  Size Range
    $/100 kg   
  pig sold
     $/animal  
   marketed
                                 
Range
Average
Range
Average
Farrow-Finish
300 to 1,500 sows
3.5 - 12.0
6.3
3.0 - 12.0
6.8
Farrow-Finish
excluding feedmill
300 to 2,000 sows
6.0 - 11.5
6.3
3.8 - 13.0
6.5
Grow-Finish
10,000 to 40,000
feeders/weanlings
1.2 - 2.6
1.7
1.3 - 2.1
1.7
Nursery
130,000 to 140,000
feeders/weanlings
1.7 - 2.2
2.0
0.5 - 0.7
0.6
Farrow-Wean
150 to 1,200 sows
8.2 - 17.8
12.2
0.8 - 4.3
1.9
Note:  Based on three-year historical data from 16 Farrow-Finish, 2 Nursery, 6 Grow-Finish and 4 Farrow-Wean barns.


Based on the results of the survey, four barns were selected on which an energy audit and detailed energy use monitoring were conducted. Two of the barns were among the highest energy users (per animal) and the other two were among those which used the least energy per animal. Results of energy audits conducted during summer months showed that the farrowing rooms had the highest level of electric power consumed per pig (kWh/head) as shown in Table 2. The choice of strategies adopted for creep heating contributed to the wide range of energy used between farrowing rooms in different barns. Barn C used heat lamps only, thus resulting to high electrical energy consumption. Other barns used a combination of heat lamps and heat pads that resulted to a relatively lower electrical energy consumption compared to Barn C. Gestation rooms had the second highest energy usage. Heat generated by the sows combined with high outdoor temperature required almost continuous operation of all fan stages to maintain the required room set-point temperature and keep the sows comfortable.


Table 2. Daily average of electrical energy consumption per pig in kWh/head (July – Sep 2007).

Room Type
Barn A
(Farrow-Finish)
Barn B
(Farrow-Finish)
Barn C
(Farrow-Wean)
Barn D
(Grow-Finish)
Average
(kWh/head)
Farrowing
3.74
2.70
4.93

3.79
Nursery
0.08
0.16


0.12
Grow-Finish
0.17
0.14

0.096
0.14
Gestation
0.39
0.53
0.36

0.43


CONCLUSIONS

Results of the survey and energy audits showed that within each barn type, some barns used significantly higher energy than the overall mean for all barns of the same type while others used substantially less than the mean, indicating that there are significant opportunities for improving energy use practices in some barns to reduce overall energy costs. Production stage, equipment, and practices in different types of rooms in the barn can significantly impact the overall energy consumption. Among the different production stages, farrowing rooms using heat lamps solely for creep heating had the highest electrical energy usage per pig.

Data collected from winter energy monitoring will complete the benchmarking phase of the study. Information from benchmarking phase will be used to run computer simulations to evaluate various energy conservation strategies and quantify energy savings associated with their implementation. Understanding the patterns of how energy is utilized in each barn is valuable in determining energy conservation strategies that would work best for each particular operation. The outcome of this project is expected to help guide pork producers in managing the use of energy in their operations more efficiently, thereby reducing overall energy costs.


ACKNOWLEDGEMENTS

Strategic funding provided by Sask Pork, Alberta Pork, Manitoba Pork Council and Saskatchewan Agriculture and Food. Project funding provided by Advancing Canadian Agriculture and Agri-Food Saskatchewan (ACAAFS). Assistance provided by Zhifang Chen, Emmanuel Canillas and Daisy Asis is acknowledged.


By E.C. Navia, B.Z. Predicala, L. Whittington and J.F. Patience
Prairie Swine Centre Inc. news



Published 08/15/2008




歡迎光臨 畜牧人 (http://ffers.com.cn/) Powered by Discuz! X3.5