查看: 3777|回復: 0
打印 上一主題 下一主題

[畜牧英語] Hatchery Management: The Hatch Window

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2008-8-8 09:28:00 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式
By Steven Tweed - The hatching of strong and viable chicks is a key factor in increased broiler performance. To increase the probability of strong birds, good hatchery management becomes critical. One management technique is to measure the 'hatch window'.

The 'hatch window' is an investigation to check the number of chicks hatched after the eggs have been transferred from the setter to the hatcher. If the eggs are hatching too early, the chicks become susceptible to problems such as dehydration. Dehydration to chicks this early could lead to increased 7- and 14-day mortality and/or poor broiler performance. If the chicks are hatching too late, the result could be poor hatchability, chick quality problems, increased pipped eggs and live embryo unhatched eggs.
Method for Examining the Hatch WindowThe procedure to investigate the hatch window is quite simple and should be included as a hatchery routine.
  • To investigate immediately and to understand how the chicks are hatching after the eggs have been transferred to the hatcher, use the top three trays marked as 1, 2 and 3 to test. This allows the hatching trays to be taken out and replaced quickly without interfering with the hatching process.
  • Before the examination, ensure that you have a table for a work area adjacent to the hatcher and a sheet to record the number of chicks hatched. Ideally, work with two people. The first person can bring the hatcher tray to the table and return the hatcher tray once the count is complete, while the second person counts the chicks and records the data.
  • Record the figures and return the hatcher trays as quickly as possible to the hatcher.
  • Check the setter. To check how the setters are functioning from the time of set to transfer, select a flock and place a minimum of three trays in the Top, Middle and Bottom positions of the setter.
  • At transfer, carefully mark the hatchery tray with the position of the setter tray. Ensure that an identification label is securely attached to the tray, which will not be removed. Place the transferred eggs in the top three positions in the front of the hatcher for ease of manoeuvrability when checking.
  • Select the times that you wish to carry out the examination.

48 to 33 hours before pull
Ideally, there should be no chicks hatching [below].
23 hours before pull
25% of the total pull should be hatched [below].
13 hours before pull
75% of the total pull should be hatched [below].

Day of pull
100% of the total pull should be hatched. The chicks should be dry and ready to process [below].
The shell debris should be clean [right].
An example of advanced wing feather growth: this indicates that the chicks have hatched too early [below].
If the shell debris is soiled with meconium, it is another indication that the chicks have hatched early [below].
This is the normal wing feather growth when the incubation cycle is correct [right].


Factors affecting early hatch include:
  • Extended pre-heating period
  • Setting eggs too early
  • Incorrect setter and hatcher temperatures
  • Hot-spots inside the setter and hatchers
  • Incorrect ventilation
  • Seasonal temperature changes
  • Too many fertile eggs in the hatcher
Factors affecting late or delayed hatching include:
  • Setting eggs too late
  • Incorrect setter and hatcher temperatures
  • Incorrect ventilation
  • Seasonal temperature changes
  • Eggs that have been stored for long periods
  • Eggs that have been stored at too low a temperature
  • Incorrect setting patterns in multi-stage machines
  • Disease/fertility problems
ConclusionsThe hatchery manager should be aware of the condition the chicks appear at pull.

The hatch window should be investigated periodically during the seasons. Not all hatcheries have a temperature-controlled environment. Where there is no control, setter and hatcher room temperatures may fluctuate during the year, affecting the time the chicks will hatch.

Setter/hatcher and ventilation calibration are essential elements of hatchery management.


Steven Tweed
Steven Tweed has served in the UK working as a hatchery expert since 1966. He brings with him extraordinary knowledge of hatchery operations as he has been responsible for the pedigree, great-grandparent and parent hatcheries for over 13 years.

Investigating the hatch window is an indication that procedures may need to be changed and regular servicing / maintenance of equipment is maintained.

The hatchery manager must have knowledge of 7-day customer/company mortality. It is essential information to understand what is happening with hatchery incubation.

August 2008
中國畜牧人網站微信公眾號
版權聲明:本文內容來源互聯網,僅供畜牧人網友學習,文章及圖片版權歸原作者所有,如果有侵犯到您的權利,請及時聯系我們刪除(010-82893169-805)。
您需要登錄后才可以回帖 登錄 | 注冊

本版積分規則

發布主題 快速回復 返回列表 聯系我們

關于社區|廣告合作|聯系我們|幫助中心|小黑屋|手機版| 京公網安備 11010802025824號

北京宏牧偉業網絡科技有限公司 版權所有(京ICP備11016518號-1

Powered by Discuz! X3.5  © 2001-2021 Comsenz Inc. GMT+8, 2024-12-23 11:06, 技術支持:溫州諸葛云網絡科技有限公司